Kicker 46CXA1200.1 CX Series

High-level bass power

• Kicker’s CXA1200.1 mono subwoofer amplifier can put out up to 1,200 watts RMS, so your sub will really push some air. The quality of the bass tone matters as much as the volume, so a variable low-pass filter helps get maximum performance from your sub/enclosure combination, and a fixed subsonic filter removes the extreme low resonances that cause distortion.
• A variable bass boost allows you to add some extra low-end punch if you want. An optional wired remote lets you conveniently adjust the bass level from your front seat. Hooks in almost anywhere in almost any position.
• This amplifier works with 1-ohm loads, so you won’t have to worry too much about matching impedances when you add a second or third sub to your system. Kicker’s Fail-Safe Integration Technology (FIT™) keeps this amp’s input free from noise or interference, so you can tap into your vehicle’s speaker wiring for an input signal without a worry. A 3-second turn-on/turn-off delay eliminates system pops and other noises.
• The CXA1200.1 comes with hardware that lets you mount it vertically, so you can put it in a location that takes up very little floor space and looks cool too.
• This amplifier can draw large amounts of current (up to as much as 100 amps), so you may have to upgrade the electrical system in your vehicle in order to effectively power the amp.
• CXA1200.1 input and control panel.

Product Highlights:

• Mono subwoofer amplifier
• 600 watts RMS x 1 at 4 ohms (1200 watts RMS x 1 at 2 ohms)
• 1200 watts RMS +/-10% x 1 at 1 ohm
• CTA-2006 compliant
• Class D amp technology
• Frequency response: 25-200 Hz
• Variable low-pass filter (50-200 Hz, 12 dB/octave)
• Fixed subsonic filter (25 Hz, 24 dB/octave)
• Variable bass boost (0-6 dB at 40 Hz)

• Preamp inputs and outputs
• Speaker-level inputs (speaker wire to RCA adapters required)
• Optional remote bass level controller available
• 3-second delay for turn-on and turn-off
• Includes hardware for vertical mounting
• Wiring, fuse, and hardware not included with amplifier
• 4-gauge power and ground leads and a 150-amp fuse recommended
• Dimensions: 12-5/8″W x 2-3/8″H x 6-3/4″D
• MFR # 46CXA12001

• Kicker 46CXA1200.1 owner’s manual
• Mono amplifier
• 2 Vertical mounting brackets
• 3mm Allen wrench
• Four 3/4″ Screws
• Owner’s manual
• Power chart
• Certified Power certificate