Kicker 11HS8

• When Kicker set out to make the Hideaway™ compact powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. At just over 3″ tall, the Hideaway™ will fit under many seats and in storage areas where you don’t usually find powered subs. The powerful, built-in 150-watt RMS amplifier delivers strong bass that’ll add depth and punch to any type of music. Big performance.
• The 8″ woofer can hit low notes that’ll really rock your ride, especially when the Hideaway™ is mounted in the vehicle’s interior. The included remote control bass knob will let you adjust the bass level on the fly. Kicker even included Nylon straps with Velcro® fasteners to mount the sub, plus a quick disconnect harness with power and signal wiring that’ll make the installation easier.
• Installation Note: The Hideaway™ sub will accept preamp-level signals, but you’ll need to connect this adapter to the sub’s 8-foot signal harness so you can plug it into your receiver’s preamp outputs.

Product Highlights:

• Compact powered subwoofer
• 8″ woofer
• Built-in 150 watts RMS amplifier
• Frequency response: 25-120 Hz
• Variable low-pass crossover (50-120 Hz)
• Variable phase control (0 or 180 degrees)
• Bass boost control (0dB to +6dB)
• Speaker-level inputs (will also accept preamp-level signal using optional adapter, item 20646KiSL, sold separately)
• Auto turn-on switch
• Wired remote control
• Dimensions: 14-1/4″W x 3-1/4″H x 9-3/8″D
• MFR # 11HS8

What’s in the Box:

• Kicker 11HS8 owner’s manualAmplified subwoofer
• Wiring harness (17.5′ Power input/ 8′ Speaker level input/ 2′ Ground/ 2′ Remote turn-on)
• In-line fuse holder
• One 15 amp ATO fuse (installed in fuse holder)
• Two 10 amp ATO fuses (1 installed in the chassis of the unit/1 spare)
• Remote bass level control
• Metal bracket (for mounting remote bass level control)
• 20′ Remote cable (3.5mm stereo mini-plug on both ends)
• 2 Velcro mounting straps
• Two 10-12 gauge crimp-on ring terminals
• One 10-12 Gauge butt connector
• 4 Flat washers
• 4 Mounting brackets
• Two 3/8″ Self-tapping pan head screws (to mount wired remote)
• Four 3/4″ Self-tapping pan head screws
• Eight 3/4″ Self-tapping flat head screws
• Four 1-3/8″ Self-tapping flat head screws
• Mounting template
• Owner’s manual (English/ Spanish/ German/ French)